76 937 999CONTACT US
0Item(s)

You have no items in your shopping cart.

Product was successfully added to your shopping cart.

Universal Audio Outboard 4-710D

Quick Overview

4-channel Tube/FET Preamp and DI with Tone Blending Knob, and 8-channel 24-bit/192kHz A/D Conversion
Universal Audio
$2,398.00

Order it now ! Only 10 left

WHATSAPP ORDER

Details

The Centerpiece of Your Studio!

The Universal Audio 4-710d combines four 710 Twin-Finity mic pres into a single unit with A/D conversion and costs less than three original 710s combined! But that's not all. The preamps take a Class A FET preamp circuit and a completely separate Class A triode tube preamp and give you the ability to blend the two signals together to taste. While they were at it, Universal Audio also added a simple 1176-based compression section to each channel. Now it's even easier and more cost effective than ever to add a set of these fantastic hybrid preamps to your studio.

Four 710 Twin-Finity mic preamps with compression

Most sound engineers know about the Universal Audio 710 Twin-Finity mic preamp — an award-winning design that's standard equipment in top studios and live rigs worldwide. The UA 4-710d features four of these bad boys and comes in well under the price of four separate 710 units. Each channel also offers UA's newly designed 1176-style compression circuit. Not only do you get top-notch-sounding preamps, but you can dial in the exact amount of compression you need to make your sound source punch through the mix.

Phase-aligned "tone blending" of tube and solid-state

Each of the four mic preamp channels on the 4-710d allows for choosing between a 100% solid-state and 100% tube signal path, or any mix of the two that you desire, using a continuously variable control. Don't get stuck having to switch preamps every time you want a different sound, or worse yet, get stuck with only one sound to work with. Go from pristine to euphonic with Universal Audio's 4-710d blendable solid-state and tube signal paths.

Onboard A/D conversion with digital outputs

As if the Universal Audio 4-710d doesn't do enough for your studio, the eight analog inputs are also digitized via 24-bit A/D converters up to 192kHz. Digital output is available via dual ADAT "lightpipe" or AES/EBU DB-25 connectors, giving you effortless compatibility with most popular audio interfaces. What's more, you can even input up to four other analog mic preamps through the 4-710d to access its superior A/D conversion.

Universal Audio 4-710d 4-channel Microphone Preamplifier Features:

  • Phase-aligned "tone blending" of tube and solid-state
  • Newly designed 1176-style compression/soft-limiting circuit on each mic channel
  • Monolithic balanced output stage
  • Dual gain stages
  • Balanced send/return inserts
  • Discrete JFET DI with 2.2M ohm ultra-hi-Z impedance
  • 70dB+ of gain, +48-volt phantom power, pad (15dB), phase invert, and low-cut filter (75Hz)
  • Front-panel hi-Z input (switched from mic/line)
  • Rear-panel XLR mic input, XLR line input, and XLR line output
  • Digital output via dual ADAT optical or AES/EBU (DB-25)
  • 8 channels of high-quality 24-bit/192kHz A/D conversion

 

Tech Specs

  • Preamp Type: Hybrid
  • Number of Channels: 4
  • Phantom Power: Yes
  • Compressor: Yes
  • Analog Inputs: 4 x XLR (Mic), 4 x 1/4" (Line), 4 x 1/4" (Hi-Z), 4 x 1/4" (Line - CH 5-8)
  • Analog Outputs: 4 x XLR
  • Digital Outputs: 1 x DB-25 (AES/EBU), 2 x Optical (ADAT)
  • Clock I/O: 2 x Word Clock
  • Frequency Response: 20Hz-20kHz
  • Rack Spaces: 2U
  • Height: 3.5"
  • Depth: 12"
  • Width: 19"
  • Weight: 11.5 lbs

 

Additional Information

PROSTAT N/A
Outboard type Compressor, Limiter, MIc preamp
Analog I/O 4 XLR IN, 4 XLR OUT
Top features 20db padding, Phantom power, Phase reverse, Tube lamps
Brands Universal Audio

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

  1. Be the first to review this product

Write Your Own Review

Only registered users can write reviews. Please, log in or register