76 937 999CONTACT US
0Item(s)

You have no items in your shopping cart.

Product was successfully added to your shopping cart.

Warm Audio WA-47Jr Large-Diaphragm Condenser Microphone - Nickel

Quick Overview

Transformerless Large-Diaphragm FET Condenser Microphone with 3 Polar Patterns, 10dB Pad, and 70Hz Highpass Filter
warm audio
$399.00

Order it now ! Only 10 left

WHATSAPP ORDER

Son of ’47

Compared to tube-based microphones, solid-state microphones like the Warm Audio WA-47jr are prized for their detailed sound and resistance to distortion. These are the reasons transformerless FET mics with a U47-style capsule are so popular on kick drums and other percussion instruments, capturing their power and intensity with amazing fidelity. So naturally, the WA-47jr shines on percussion. That said, it’s also a go-to choice for acoustic instruments where capturing fast transients is critical, and it should be on your short list of mics to audition on vocalists, electric guitar cabs, and a whole lot more. Perhaps the more pertinent question is: what isn’t it great on?

Three polar patterns = impressive flexibility

The WA-47jr’s three polar patterns — cardioid, omni, and figure-8 — give you impressive flexibility when it comes to exploring different recording techniques. Cardioid, with its moderate side and near-total rear rejection, is useful for just about any studio task. Omni is great for capturing room ambience along with your source. Use a figure-8 technique to overdub a sax with natural slap or to record two singers on one mic (just be sure of the balance). And with two of these mics, you can implement stereo techniques such as spaced pair (A/B), XY (including Blumlein), ORTF array, and mid-side (M-S).

What can the WA-47jr do for you?

Every studio needs at least one pair of high-quality large-diaphragm condenser mics. You can use the WA-47jr on anything. It’s great on vocals, acoustic guitars, double bass, electric guitar and bass cabs, piano, drums and percussion, strings, brass, woodwinds, and any other source you’d care to throw at it. Considering its amazing price, it would be wise to at least double your value and get two for recording tracks in stereo!

Quality components make the Warm difference

How does Warm Audio do it? They order parts and build in quantity, which keeps costs down and delivers amazing value, but they do not cut corners on parts. The WA-47jr is built with premium all-discrete components, such as Toshiba FETs, Wima film capacitors, Panasonic electrolytic capacitors, and a custom reproduction of the capsule used in vintage ’47s.
SPECIFICATION
Fully discrete, transformerless signal path
Custom ’47-style k47 34mm gold-sputtered, dual-diaphragm, single–back plate, 6 micron Mylar capsule
Toshiba FETs, Wima film capacitors, Panasonic electrolytic capacitors
Cardioid, figure-8, and omnidirectional polar patterns
10dB pad; 70Hz highpass filter
Self-noise: 9dBA
Dynamic range: 138dBA
Maximum SPL: 147/157dB (at 1kHz, 1 Kohm, 0.5% THD, 0/-10dB)
Frequency range: 20Hz–20kHz
Sensitivity: 10mV/Pa or -40dB
Output impedance: 100 ohms
Rated load impedance: ≥1 Kohm
Maximum output: 16dBu at 1kHz, 1 Kohm, 0.5% THD
S/N ratio: 85dBA (IEC651)
Equivalent noise: 9dBA (IEC651)
Dynamic range: 138dBA (IEC651)
48-volt phantom powered
3-pin gold-plated XLR connector
Includes shockmount, hardmount, and zipper storage pouch


Details

Ragtime authorized dealer of Warm audio in Lebanon

Additional Information

PROSTAT No
Brands warm audio
Diaphram type Super Cardioid
Digital converter No
Connection Dual Analog & UAB A/D

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

  1. Be the first to review this product

Write Your Own Review

Only registered users can write reviews. Please, log in or register